We have certainly supported the FANUC controller previously also. I can try to supply you with a test sample from our default FANUC post, and see how that goes for you.
Regards,
Alex
Hi Valentin,
We have certainly supported the FANUC controller previously also. I can try to supply you with a test sample from our default FANUC post, and see how that goes for you.
Hi Valentin,
We have supported AMADA Machines in the past, however they often require POST Configuration. Are you able to supply the following:
1. Confirmed working Sample Code for the Controller
2. A Drawing to match that Code
3. Programming manual (If Available)
With that we can confirm what you specific machine requires
Cheers,
Alex
Hi Valentin,
We have supported AMADA Machines in the past, however they often require POST Configuration. Are you able to supply the following:
1. Confirmed working Sample Code for the Controller
2. A Drawing to match that Code
3. Programming manual (If Available)
With that we can confirm what you specific machine requires
Cheers,
Alex
Hi Alex,
At the moment, we don't have any functional G-code, Just the model of the Machine, Amada Laser LC-1212aII (from 1998)
The Control I believe it's a Fanuc 16i/160
Hi Alex,
At the moment, we don't have any functional G-code, Just the model of the Machine, Amada Laser LC-1212aII (from 1998)
The Control I believe it's a Fanuc 16i/160
Hi Valentin,
We have certainly supported the FANUC controller previously also. I can try to supply you with a test sample from our default FANUC post, and see how that goes for you.
Regards,
Alex
Hi Valentin,
We have certainly supported the FANUC controller previously also. I can try to supply you with a test sample from our default FANUC post, and see how that goes for you.
Regards,
Alex
Replies have been locked on this page!