FastCam 7 adding text not working in nest
In Progress
Hi All Recently bought a CNC Machine and came with Fastcam 7 CD and Red dongle. i somewhat figure out how to design what i want but cant seem to set it up to cut out letters.
am i missing something ?
Hi Jayden,
Can you let me know what is your FastCAM Dongle number? it will be written on the dongle.
Also, with FastCAM 7 & 8, to output text, like you have it there, you need to have a text marking process. However, from what you said, it sounds like you'd rather cut the letters. If that's the case, might I recommend having a look at FontGEN:
https://www.fastcam.com/fontgen.html
As this will allow you to design text, and then add it to your drawing (using the Blocks > Read Block). Which can then be cut.
Hope that helps!
Cheers,
Alex
Hi Jayden,
Can you let me know what is your FastCAM Dongle number? it will be written on the dongle.
Also, with FastCAM 7 & 8, to output text, like you have it there, you need to have a text marking process. However, from what you said, it sounds like you'd rather cut the letters. If that's the case, might I recommend having a look at FontGEN:
https://www.fastcam.com/fontgen.html
As this will allow you to design text, and then add it to your drawing (using the Blocks > Read Block). Which can then be cut.
Hope that helps!
Cheers,
Alex
Replies have been locked on this page!